Jump to content

As of July 17, 2015, the LabJack forums here at forums.labjack.com are shut down. New registrations, topics, and replies are disabled. All forums are in a read-only state for archive purposes.

Please visit our current forums at labjack.com/forums to view and make new posts. To post on the current forums, use your labjack.com login account. Your old LabJack forums login credentials have been retired. There are no longer separate logins for labjack.com and LabJack forums.


Photo

Stand alone U3


  • Please log in to reply
1 reply to this topic

#1 TonyF

TonyF
  • Members
  • 16 posts

Posted 28 June 2013 - 11:05 PM

Are there any plans to make a stand alone DAQ box, say like the U(3), which could be pre-configured to what lines were A and which were D, and which would save data to an SD or USB chip? The chip would then be removed and processed, or else the box could be connected by USB (or wireless) for download.

#2 LabJack Support

LabJack Support
  • Admin
  • 8677 posts

Posted 29 June 2013 - 08:39 AM

The way to do that right now is to use a USB LabJack like the U3 with a Raspberry Pi, which requires Linux knowledge among other things. The new T7-Pro will also be able to do what you describe when scripting support is added in the not too distant future. The T7 might support scripting also, but if you likely want the real-time clock (RTC) and 2GB flash that you only get on the Pro.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users