Jump to content

As of July 17, 2015, the LabJack forums here at forums.labjack.com are shut down. New registrations, topics, and replies are disabled. All forums are in a read-only state for archive purposes.

Please visit our current forums at labjack.com/forums to view and make new posts. To post on the current forums, use your labjack.com login account. Your old LabJack forums login credentials have been retired. There are no longer separate logins for labjack.com and LabJack forums.


Photo

IP Reset Problem


  • Please log in to reply
2 replies to this topic

#1 akehn

akehn
  • Members
  • 2 posts

Posted 22 February 2013 - 08:46 AM

I'm trying to solve an IP issue with a UE9 LJ device. I was getting an Invalid AIN range error in LJLogUD when trying to run with an ethernet connection. I thought that this could be due to mismatch of subnet and device IPs so I tried changing the device IP through LJ Control Panel (the UE9 uses 10.200.8.244 as opposed to the default 192.168.1.209). After some searching through the forums I realized the AIN error was not a connection problem and it has since been fixed (USB connection works fine). The problem now is that when I try to change back to the original IP address in LJ Control Panel, the IP Address, Subnet, and Gateway values are all set to zero upon restart of the Control Panel. I have been using "write values" before restart of the application. Thanks for your help, Alex

#2 LabJack Support

LabJack Support
  • Admin
  • 8677 posts

Posted 22 February 2013 - 09:50 AM

Have not heard of that issue before. Perhaps update to the latest UD driver, LJControlPanel, and UE9 firmware:

http://labjack.com/s...dows-ud/beta-ud

http://labjack.com/s...rmware/ue9/beta

Another thing you can try is powering up with a jumper securely installed from FIO2 to SCL:

http://labjack.com/s...ers-guide/5.2.1

#3 akehn

akehn
  • Members
  • 2 posts

Posted 22 February 2013 - 11:43 AM

So, after swapping UE9's I realized I was on the wrong subnet. Thanks for your suggestions, though.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users