Jump to content

As of July 17, 2015, the LabJack forums here at forums.labjack.com are shut down. New registrations, topics, and replies are disabled. All forums are in a read-only state for archive purposes.

Please visit our current forums at labjack.com/forums to view and make new posts. To post on the current forums, use your labjack.com login account. Your old LabJack forums login credentials have been retired. There are no longer separate logins for labjack.com and LabJack forums.


Photo

open circed voltage


  • Please log in to reply
1 reply to this topic

#1 DanielIIC

DanielIIC
  • Members
  • 1 posts

Posted 15 October 2012 - 11:03 AM

Hi, I have a bit of a problem with the U6-pro, 2 things happen and may be they are dependent. 1. I nothing is wired on the Lab Jack, not a single one, I get a reading on AIN of around 7 Volt, is this normal? This is gone If I connect the AIN with Ground level of the LabJack, so it is not a error in the reading. 2. If I have for example 3.000 Volt on AIN 1 and apply 5.000 Volt on AIN 2 than AIN 1 is changing from 3.000 to 3.020. If I do it the other way around than the 5 Volt chnage to 5.500V or simular. You can see that something is proper wrong but I just don't have a idea what is the problem. Any ideas? thanks Daniel

#2 LabJack Support

LabJack Support
  • Admin
  • 8677 posts

Posted 15 October 2012 - 11:53 AM

1. That is likely fine. There is not predictable expected voltage from a floating channel:

http://labjack.com/s...s-guide/2.6.3.8


2. If the reading from a channel varies depending on the voltage of the channel read previously, that suggests a settling problem. Perhaps the signal is weak? That is, does the signal have high source impedance?


https://forums.labja...?showtopic=5900

https://forums.labja...?showtopic=5770

https://forums.labja...?showtopic=5237


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users