Jump to content

As of July 17, 2015, the LabJack forums here at forums.labjack.com are shut down. New registrations, topics, and replies are disabled. All forums are in a read-only state for archive purposes.

Please visit our current forums at labjack.com/forums to view and make new posts. To post on the current forums, use your labjack.com login account. Your old LabJack forums login credentials have been retired. There are no longer separate logins for labjack.com and LabJack forums.


Is there a way to set a digital bit out to 5v

  • Please log in to reply
1 reply to this topic

#1 Sunny127

  • Members
  • 1 posts

Posted 14 October 2012 - 08:00 AM

Hi, I use: ePut (lngHandle, LJ_ioPUT_DIGITAL_BIT, 4, 1, 0); To set a digital bit out to true, and get 3.3v on it , which is fine, but I wonder if there is a way to make it output 5v like most of the aparature here needs... Any Ideas?

#2 LabJack Support

LabJack Support
  • Admin
  • 8677 posts

Posted 15 October 2012 - 07:23 AM

I added information to Section 2.8:


What are the required logic levels of your equipment? Most 5V logic works fine with 3.3V, but some logic specifies a high to be 0.7*Vdd, so if Vdd=5V you need >=3.5V for logic high, and that is a problem.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users